Filter
Top Products
13-EN
01GB05IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
3
The screen changes to another source by touching
[SOURCE] on the main source screen.
• The screen can be changed to the VISUAL selection screen by
touching [VISUAL].
Set to VISUAL in “Setting the VISUAL Touch Button” (page 34).
• The screen can be changed to the SETUP selection screen by
touching [SETUP].
• After 5 seconds of each operation in the visual mode, the screen
changes to the visual screen only.
To display the source selection screen, touch the display panel, then
touch [CONTROL] on the screen. The source selection screen
appears by touching [SOURCE] on the changed main source screen.
In the main source display, shortcuts for set up of Media Xpander, Bass
MAX EQ, Visual EQ, and DOLBY PLII can be shown and their settings
can be made directly.
1
Touch [] on the far right of the main source
screen.
The shortcut menu screen is displayed. (Displayed when
DEFEAT is set to OFF. However, visual EQ is displayed,
regardless of turning DEFEAT ON or OFF.)
2
Touch a desired setup menu.
MX (Media Xpander):
Selects the MX mode of the currently displayed audio source.
Visual EQ:
Selectable when the visual source mode is turned on.
DOLBY PLII:
Displayed when an external audio processor is connected.
Bass Max EQ:
Allows choosing any desired mode. (This function cannot be set
when an external audio processor is connected. The setting can
be carried out on the audio processor.)
Display example for shortcut menu screen
Display example for setup screen
Close the Shortcut menu screen by touching [].
The screen changes to the setup screen mode by
touching another mode.
Your desired setting can be made by using operation
buttons.
The shortcut menu screen closes by touching this area.
The numeric keypad input screen is displayed when the DVD mode is
selected for searching a title or chapter, and for entering a country code
or password for the DVD setup item, and also when selecting a channel
number in the SAT Radio mode.
1
Touch [10KEY] on the main source screen.
2
Touch the desired numeric key.
Shortcut Screen
Displaying the Numeric Keypad Input
Screen
The setup screen is
displayed by touching
one of these modes.
The shortcut menu
screen closes by
touching this area.
01GB00IVAD310.book Page 13 Wednesday, December 1, 2004 4:20 AM