Filter
Top Products
14-EN
01GB05IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
Display example for numeric keypad
Operation buttons of this area can be used while
displaying the numeric keypad input screen.
Input screen area
Closes numeric keypad input screen
All input numbers will be deleted
Previous number will be deleted
Input number is confirmed
Numeric keypad
The numeric keypad input screen closes when the area
is touched while displayed.
3
Touch [ENT] to confirm your entry.
The connected AMP Link-compatible external amplifier can be
displayed in dual-screen on the main source screen.
1
Touch [VISUAL] on the main source screen.
The VISUAL selection screen appears.
To make the setting, set to “Setting the VISUAL Touch
Button” (page 34).
2
Touch [DUAL SCREEN].
The main source screen is restored showing the dual-
screen display.
Display example for the dual-screen
3
Touch [VISUAL] to cancel the dual-screen display.
The VISUAL selection screen appears.
4
Touch [NORMAL].
The normal screen will be restored.
Display example for Radio main screen
[SOURCE] button: Refer to page 12
[VISUAL] button: Displays the VISUAL selection screen
[SETUP] button: Displays the SETUP selection screen
[] button: Refer to page 13
Displays the preset number/frequency.
Listening to the Radio
1
Touch [SOURCE] on the main source screen.
The source selection screen is displayed.
2
Touch [RADIO].
The radio mode is activated and the display changes to the
Radio Mode screen.
3
Touch [BAND] to select the desired radio band.
Each press changes the bands as follows:
4
Touch [TUNE] to choose the tuning mode.
Each touch changes the tuning mode display.
• There are two modes you can select for auto tuning, DX and
Local:
- DX (Distance) mode (with DX SEEK indicator ON);
Both strong and weak stations will be tuned in.
- Local mode (with SEEK indicator ON);
Only strong stations will be tuned in.
The initial setting is DX.
5
Touch [], [] or [], [] to change the
radio frequency up or down respectively.
When the button is touched and held, the frequency
changes continuously until the button is released.
When a stereo FM station is tuned in, the STEREO indicator appears
in the display.
Dual-Screen Display
Changes the AMP display
for the connected amplifier.
Radio
FM-1 FM-2 AM FM-1
Distance Local Manual Distance
01GB00IVAD310.book Page 14 Wednesday, December 1, 2004 4:20 AM