Alpine IVA-D310 Car Video System User Manual


 
61-EN
01GB06IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
/ Button
SEARCH Button: Not used.
button
Performs stop.
MENU Button
CLR Button
Removes numbers (one character at a time) that have been
selected and input.
Press and hold for 2 seconds. All the characters which were
selected and input are erased.
DISP/TOP M. Button
SETUP Button
Not used.
AUDIO Button
DVD/Video CD mode: Switches audio.
BAND Button
A.PROC Button
Press the button to call the Bass engine setting screen.
MUTE Button
Lowers the volume by 20 dB instantly. Press the button
again to cancel.
By pressing the button for more than 2 seconds, the monitor
opens or closes.
UP Button
, , ,
ENT. Button
Enters the selected item.
button
Numeric Keypad
Inputs numbers.
MONITOR Button
Not used.
ANGLE Button
SUBTITLE button
The SETUP operation of the unit cannot be carried out from the
remote control.
Some operations may not be possible depending on the disc.
When Using the Remote Control
Point the remote control at the remote sensor within
about 2 meters.
It may not be possible to operate the remote control if
the remote control sensor is exposed to direct
sunlight.
The remote control is a small, lightweight precision
device. To avoid damage, short battery life,
operational errors and poor response, observe the
following.
- Do not subject the remote control to excessive
shock.
- Do not put in a trouser pocket.
- Keep away from food, moisture and dirt.
- Do not place in direct sunshine.
DVD/Video CD: Move to the desired position on the disc.
During playback, press and hold for
more than 1 second to reverse the disc
at double speed. Hold for more than 5
seconds to reverse the disc at 8 times
the normal speed.
DVD mode: When pressed and held in while in the
pause mode, the disc is played in
reverse slow motion at 1/8th the normal
speed. When held in for 5 more
seconds, the reverse slow motion speed
switches to 1/2 the normal speed.
The picture is reversed by one frame
each time the button is pressed in the
pause mode.
Radio mode: Chooses the tuning mode.
By pressing it more than 2 seconds,
Automatic Memory will be operated.
Disc mode: Switches between play and pause.
DVD/Video CD:
Pressing once stops the PRE stop; Pressing
twice sets stop.
DVD mode: Shows the menu display.
Video CD mode:
Turns PBC ON or OFF. (for Video CD with
PBC functions)
DVD/Video CD mode:
Shows playback status.
DVD mode: By pressing more than 2 seconds, shows the
top menu display.
Radio mode:
Changes the band.
Changer mode:
Switches the disc mode.
(when an optional KCA-410C is connected)
Radio mode: Selects, in ascending order, stations
programmed into the radio’s presets.
MP3/WMA mode:
Folder Select (UP) Button to selects the
folder.
Changer mode:
DISC Select (UP) Button selects a disc in
ascending order.
DVD mode: Selects an item displayed in the screen.
Radio mode: SEEK (UP) button
CD/Changer mode:
Press the button to advance to the beginning
of the next track. Press and hold to fast
forward.
MP3/WMA mode:
Press the button to advance to the beginning
of the next file. Press and hold to fast
forward.
DVD/Video CD:
Move to the desired position on the disc.
During playback, press and hold for more
than 1 second to forward the disc at
double speed. Hold for more than 5
seconds to forward the disc at 8 times the
normal speed.
When pressed and held in while in the
pause mode, the disc is played in slow
motion at 1/8th the normal speed. When
held in for 5 more seconds, the slow
motion speed switches to 1/2 the normal
speed.
The picture is forwarded by one frame
each time the button is pressed in the
pause mode.
DVD mode: Switches the angle of the picture.
DVD mode: Switches the subtitle.
01GB00IVAD310.book Page 61 Wednesday, December 1, 2004 4:20 AM