Filter
Top Products
77-EN
01GB07IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
Antenna Extension Cable
Digital Output Terminal (Optical)
Use when combining fiber digital input compatible
products.
Power Supply Connector
DC/DC Converter
• Do not install the converter at a location subjected to water
such as under the floor mat or air conditioner. This may cause a
malfunction.
• Do not bundle the DC/DC converter cable with other audio
cables. Also, do not install the cables directly next to the unit.
Doing so may induce noise into your system.
• Keep the DC/DC converter away from the Antenna cables and
the rear side of the unit, otherwise noise may be generated when
receiving radio broadcast.
Battery Lead (Yellow)
Connect this lead to the positive (+) post of the vehicle’s
battery.
Fuse Holder (10A)
Ground Lead (Black)
Connect this lead to a good chassis ground on the vehicle.
Make sure the connection is made to bare metal and is
securely fastened using the sheet metal screw provided.
Remote Control Output Lead (White/Brown)
Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.
Remote Control Input Lead (White/Brown)
Connect the external Alpine product to the remote control
output lead.
Reverse Lead (Orange/White)
Use only when a back-up camera is connected. Connect to
the plus side of the car's reverse lamp that lights when the
transmission is shifted into reverse (R).
Switches the video picture to the back-up camera. This is
linked with putting the car into reverse (R).
Monitor Control Lead (White/Pink)
Connect this to the Monitor Control Lead of the touch panel-
compatible rear monitor.
Monitor Extension Cable (Included)
Remote IN/OUT Terminal
Display Output Terminal
System Switch
When connecting an equalizer or divider using Ai-NET
feature, place this switch in the EQ/DIV position. When no
device is connected, leave the switch in the NORM position.
• Be sure to turn the power off to the unit before changing the
switch position.
Antenna Receptacle
AUX Input Terminals/AUX Output Terminals
If these terminals are connected to the optional expansion
box (VPE-S431), the AUX input and output terminals are not
used on this unit. Connect AUX IN 1, 2 and 3, and the AUX
OUT 1 and 2 terminals of the expansion box (VPE-S431) to
the external device(s).
AV Select Connector
When this connector is connected to the optional expansion
box (VPE-S431), connect this to the HEAD UNIT terminal of
VPE-S431.
Ext. Output Connector
If this connector is connected to the optional Amplifier Link
compatible monaural Amplifier, connect this to the optional
Amplifier Link Box, and output the Amplifier Link control
signal.
Ai-NET Connector
Connect this to the output or input connector of other
product (CD changer, Equalizer, iPod adapter*, etc.)
equipped with Ai-NET.
* If you connect to iPod, you need the optional adapter (KCA-420i).
For details on connection, refer to the Owner’s Manual of the KCA-
420i.
Front input/output Terminal
Use when connecting an amplifier or Equalizer.
Rear input/output Terminal
Use when connecting an amplifier or Equalizer.
Subwoofer output Terminal
Connect the input lead of an amplifier for the subwoofer to
this terminal.
Remote Turn-On Lead (Blue/White)
Connect this lead to the remote turn-on lead of your
amplifier or signal processor.
Power Antenna Lead (Blue)
Connect this lead to the +B terminal of your power antenna,
if applicable.
Audio Interrupt In Lead (Pink/Black)
Parking Brake Lead (Yellow/Blue)
Connect this lead to the power supply side of the parking
brake switch to transmit the parking brake status signals to
the IVA-D310.
Foot Brake Lead (Yellow/Black)
Connect to the vehicle's foot brake lead or brake lamp lead.
Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the vehicle’s fuse
box or another unused power source which provides (+)
12V only when the ignition is turned on or in the accessory
position.
Fuse Holder (10A)
Right Front (+) Speaker Output Lead (Gray)
Right Front (–) Speaker Output Lead (Gray/Black)
Right Rear (–) Speaker Output Lead (Violet/Black)
Right Rear (+) Speaker Output Lead (Violet)
Left Rear (+) Speaker Output Lead (Green)
Left Rear (–) Speaker Output Lead (Green/Black)
Left Front (–) Speaker Output Lead (White/Black)
Left Front (+) Speaker Output Lead (White)
Remote Control Interface Connector
Connect to the remote control interface box.
01GB00IVAD310.book Page 77 Wednesday, December 1, 2004 4:20 AM