Alpine IVA-D310 Car Video System User Manual


 
36-EN
01GB05IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
You can adjust the brightness of the backlight (LOW). This function
could be used, for instance, to change the screen brightness while
travelling at night.
Setting item: DIMMER LOW LEVEL
Setting content: -15 to +15
You can adjust the level between MIN (-15) and MAX (+15).
When it reaches the minimum or maximum point, the display
shows “MIN” or “MAX” respectively.
You have a choice of background textures you can set.
Setting item: BACKGROUND
Setting content: MODE1 / MODE2
This operation can be carried out after removing the disc from the
unit or when playback of the disc has stopped.
Wallpapers downloaded from “Downloading the MY
BACKGROUND data” (page 44) are recalled.
When you select a source other than the built-in disc on this unit, and
the built-in disc is selected on the rear monitor connected to the unit,
background textures cannot be displayed on the unit.
When an error message is displayed (ERROR, HI-TEMP, etc.),
background textures selected by this setting cannot be displayed on
the unit.
The background texture will automatically change each time the
ignition key is turned off and turned back on again.
Setting item: AUTO BACKGROUND
Setting content: OFF / ON
Wallpapers downloaded from “Downloading the MY
BACKGROUND data” (page 44) are recalled.
You can choose a character (text and tag information, etc.) font type for
the main display.
Setting item: FONT TYPE
Setting content: FONT 1 / FONT 2
You can choose from 5 different display colors for the font back (source
title, shortcut display, etc.).
Setting item: BASE COLOR
Setting contents: MODE 1 to MODE 5
You can turn the touch panel’s vibration ON or OFF during operation.
Setting item: PULSETOUCH
Setting content: OFF / ON
Adjustment becomes necessary when the display position on the LCD
and the touch position on the touch panel do not match.
Setting item: SCREEN ALIGNMENT
Setting content: / RESET
1 Touch [] of SCREEN ALIGNMENT.
The adjustment screen appears.
2 Accurately touch the mark provided in the lower left
corner of the screen.
The screen changes to the adjustment screen.
3 Accurately touch the mark provided in the upper right
corner of the screen.
This completes adjustment, and returns to the DISPLAY
setup mode screen.
If you have touched a location other than the mark, touch
[RESET] to restore the adjustment screen to the initial setting.
If you touch [RETURN] on the adjustment screen, no adjustment is
done and the DISPLAY setup screen is restored.
Adjusting the Minimum Level of Backlight
Switching Background Textures
Setting Automatic Background Textures
ON: Turn on the Auto Background Texture Scroll mode.
The background textures will scroll when the ignition key
is turned off once and turned back on again as follows:
MODE1 MODE2
OFF: Turn off the Auto Background Texture Scroll mode.
Setting the Font Type
FONT1: Selects bold characters.
FONT2: Selects round characters.
Switching the Font Back Display Color
Turning the Touch Panel Vibration ON or
OFF
OFF: Turns off vibration during operation.
ON: Turns on vibration during operation.
Adjusting the Touch Panel
01GB00IVAD310.book Page 36 Wednesday, December 1, 2004 4:20 AM