Filter
Top Products
Trouble-shooting
124
L
Trouble-shooting
Error Messages
In addition to the voice command
prompts given by the system, the error
messages shown on this and the
following pages may be displayed on the
instrument cluster display or on the rear
multimedia switchpack. Most of these
messages are accompanied by an
advisory double beep.
Voice Command
Group
Message Meaning
General VOICE NOT READY The voice system is initialising (when
ignition is first turned on). It takes the
voice system approximately 10 seconds
to initialise.
COMMAND
CANCELLED
Displayed if the user cancels a voice
session during the LISTENING period or
another system interrupts the voice
session (i.e. incoming phone call,
navigation route guidance or radio traffic
announcement).
NO SPEECH
DETECTED
The voice system has not heard any
speech.
• Ensure that the command is given
after the end of the beep.
• Ensure that the command is given
within a maximum of 5 seconds from
the end of the beep.
Note: Be sure you know what to say
before pressing the Voice button.
If this error is displayed for all
commands given this may indicate a
fault with the microphone or microphone
wiring, consult your Retailer for
assistance.