Filter
Top Products
127
Trouble-shooting
R
Nametags
(continued)
NAMETAG TOO LONG The nametag given is too long. The
voice system accepts a maximum
nametag length of up to 3.75 seconds.
STORE FAILED Displayed when the voice system fails to
store a nametag.
Possible reasons could be that the
nametag is too long or there is too much
noise. Try the command again. If the
error persists, try storing the nametag
under quiet conditions such as with the
vehicle parked and the windows closed.
Phone CONNECT PHONE
TRY AGAIN
If the GSM phone is in its cradle but
voice system keeps saying ‘dial not
accepted, please connect phone and try
again’, then the phone handset may not
be correctly attached to its storage
cradle. Try re-attaching the phone
handset. If the problem persists, the
phone may be incorrectly reporting its
cradle status. Try powering the phone
handset off and on to resolve the issue.
Navigation MAX NUMBER OF
WAY POINTS
REACHED
Displayed when the ‘NAVIGATION ADD
WAY POINT <nametag>’ is given and
the navigation system has 5 way points
already entered on the current route. If
you wish to enter this way point, you
must first delete one of the existing way
points using the navigation system.
DESTINATION
ALREADY NAMED
This text message is displayed when
you try to store a nametag to a
destination which already has a
nametag associated with it.
Voice Command
Group
Message Meaning