Filter
Top Products
25
Climate Control
R
Temperature Selection
Set the required interior
temperature with the
red or blue arrowed
buttons. Press the red buttons to increase
temperature and the blue buttons to
decrease temperature.
The selected temperatures (right-hand
side only for X-TYPE) will appear on the
LCD screen below the touch-screen.
Pressing the driver’s buttons to select the
maximum or minimum temperature
settings causes the LCD screen to
change to HI or LO respectively and
cancel AUTO mode.
To quickly jump from HI or LO to a
convenient midrange temperature of
73°F (23°C), press and hold AUTO for a
few seconds.
Dual Temperature Zones
(The XJ and S-TYPE)
With the Dual button
illuminated, the system
provides separate
temperature control of the driver and
passenger zones.
Touch Dual to deselect dual temperature
control; the passenger temperature will
change to that of the driver side. Using
the driver side temperature control
buttons will now change both zone
temperatures together.
To select dual temperature control, either
touch Dual or press one of the passenger
side temperature control buttons.
External Temperature
The external (EXT) temperature is
displayed on the LCD screen.
Celsius/Fahrenheit Selection
Touch the button to change
the scale between degrees
Celsius (°C) and degrees
Fahrenheit (°F) for the displayed interior
and external temperatures.
Timed Air Recirculation
Press the button briefly to select
air recirculation for a timed
period only; the pop-up shown
above will appear for a few seconds on
top of the currently selected
touch-screen.
The fresh air intake is opened and the
button LED extinguished at the end of the
timed period.
Latched fresh air
Pressing the air recirculation button when
the button LED is illuminated will cancel
recirculation and allow fresh air into the
vehicle.