29
Climate Control
R
Items Relevant to the XJ Only
Smog sensing
Where fitted, the smog sensor detects
road traffic pollutants and automatically
selects air recirculation when the level of
pollution outside the vehicle reaches a
certain level. The level of pollution at
which the smog sensor will respond can
be adjusted on the Options screen.
Once the level of pollutants decreases, air
recirculation will switch off (subject to the
normal operation of the automatic climate
control system).
To adjust smog sensitivity: Touch the
‘+’ button to increase sensitivity to low
smog levels. Touch the ‘–’ button to
decrease sensitivity.
Caution: Don’t set the smog sensor to
a needlessly high level in cold and
damp conditions: this could result in
interior condensation.
Controlling the rear climate panel from
the touch-screen
On the ‘Climate Options’ screen, see
page 28, the ‘Rear Climate Control’
buttons provide control of the rear
system:
• Touch the left-hand button to switch
the rear control panel on or off.
• Touch Lock Panel to lock the rear
climate control panel. This prevents
rear passengers from altering the rear
climate settings, until the next time
the ignition is switched on.
• Touching Match Driver causes the
rear zones to adopt the same settings
as the driver’s zone. Any adjustments
made directly on the rear panel will
override these settings.
• Touch Adjust Settings to alter the
settings of the rear zones. A
simulation of the rear control panel
will be displayed on the touch-screen.
Simulated rear control panel
The simulation of the rear climate control
panel allows all of the rear climate
functions to be controlled via the
touch-screen.
Operation of these touch-screen buttons
is as described for the rear panel itself in
the Owner’s Handbook.
Note: It is not possible to make
adjustments on the actual rear panel while
the touch-screen simulation of the panel
is displayed. The touch-screen display will
revert to the main climate screen
30 seconds after the last touch.