Filter
Top Products
9
IntelliTouch ScreenLogic User’s Guide
PDA Front and Side Views (Continued)
Power Button: Press the power button to turn the device on or off. Press and hold the power button to dim the
display. Repeat to light the display.
• When the device is connected to external power and the main battery is fully charged, the power
button light is solid green.
• When the battery charge is low, the power button light flashes amber.
• When the battery is being charged, the power button light is solid amber.
• When the device relays a notification, the power button light rapidly flashes green.
Touch Screen: Use the touch screen and the stylus to enter information into your device.
On/Off Button for WAN/Bluetooth® wireless technology: This button turns the wireless device on and off.
Tap it twice to confirm the switching off or on of WLAN/Bluetooth. Bluetooth is not used by IntelliTouch
ScreenLogic. Switch off the wireless device to conserve power.
Current wireless status Switch Change wireless status
WLAN Bluetooth WLAN Bluetooth
Off Off On On
On Off Off Off
Off On Off Off
On On Off Off
Home Button: Press this button to launch the Home window or to turn on the device.
Navigator Button: Press the right, left, top, or bottom of the navigator button to move the cursor on the screen.
Press the center to enter a selection.
Contacts Button: Press this button to launch Contacts or to turn on the device.
Calendar Button: Press this button to launch Calendar or to turn on the device.
Record Button: Press this button to start recording audio.
Lock Button: Use lock the device, keys and touch screen.
Battery Lock: Use this switch to release and remove the
battery.
Battery cover: Battery cover.
Cradle/Sync/Cable Connector: Connect a cradle or sync
cable.
Reset Button: Reboots the PDA.
PDA Rear View
Reset
button
Battery lock
Cradle/Sync and
Cable Connector
Stylus
Battery cover
(inside)