Filter
Top Products
59
IntelliTouch ScreenLogic User’s Guide
Main Screen (Continued)
emaNnoitpircseD
serutaeFretaW thgimuoytahtstiucricfoselpmaxeerasnottubtiucricgniwollofehT
.serutaeFretaWr
ednuyalpsid
eromroF.rotarugifnoCehtnidenifederadeyalpsidsnottubgniwolofehT
puteS“otrefer,neercsniamehtn
osnottubgniyalpsidtuobanoitamrofni
nonottuBnoitcnuFtiucriCayalpsiD“dna53egap”,)5fo2petS(stiucric
24egap
”,neercSniaMeht
:nottubllafretaW asadengissaneebsahtiucricorcaMerutaeFsihT
retaehdnapmupretlifloopehtnos
ehctiwselpmaxenottubsihT.llafretaW
3+7i,5i(smetsystnempiuqederahsroF.)delbanesitaehlaunamapSfi(
,S5i(sm
etsysydobelgnisrof.noitisoploopehtotsevlavsetator;3+9idna
.tniopteSoterutarepmetloopehtstes;)S3+9i
:not
tubniatnuoF nottubsihThdnapmupretlifloopehtnosehctiwS
.)delbanesiretaehfi(retaehdnapmupretlifloopehtnos
ehctiwselpmaxe
ehtotsevlavsetator;)3+9idna3+7i,5i(smetsystnempiuqederahsroF
loopehtstes;)S3+9i,S5i(smetsysydobelgniSroF.noitisoploop
derahsroF.)delbanesiretaehfi(retaeT.tniopteSoterutarepmet
.noitisoploopeh
totsevlavsetator;)3+9idna3+7i,5i(smetsystnempiuqe
teSoterutarepmetloopehtstes;)S3+9i,S5i(smetsysydobel
gniSroF
.tniop
Configuring Pool and Spa Heating System Options
The IntelliTouch system allows for many different pool and spa heating options. In some instances, more than one
heating system may be installed. The system can then automatically select the heating system that is most effective
for your settings. However, before the system can take advantage of these options the system must be told what
kind of heating systems are installed.
To configure the heating system options for your pool or spa, use the Heat Mode button.
1. From the ScreenLogic main screen, in the for Pool or Spa, tap a Heat Mode button to select the type of
heat option to use. The Heat Mode choices are:
• OFF: No heating even though pump and other circuits may be operating.
• HEATER: Use the gas heater only.
• SOLAR PREF. or HEAT PUMP PREF. - Solar Preferred is used when solar and gas heating are available, and
you want to use solar heating only when it is most effective. Heat Pump Pref. is displayed if solar is set up as a
Heat pump (see page 43),
• SOLAR or HEAT PUMP: Solar is used when solar heating system is the only heat source.
2. To activate a heat source, tap the Heater or Solar button. To switch off the heater, tap the Off button.
3. Tap Finish when done.