Filter
Top Products
62
IntelliTouch ScreenLogic User’s Guide
Dim Lights
Lights that have dimming functionality can be dimmed from the Lights screen. Only incandescent tungsten filament
lights may be dimmed. SAm, SAL, IntelliBrite, Fiber-optic, or Halogen lights cannot be dimmed. The feature circuit
must be assigned a dimmer circuit function. To assign a circuit function, see “Assign a Circuit Name and Function,“
page 38. In order to dim lights, the Dimmer Module (P/N 520406) must be installed by a qualified electrician in the
Load Center.
To dim lights:
1. From the Main screen, tap the Lights tab.
2. Tap one of the Dimmer buttons to set the dimming level for the light. Dimmer percent values are from 30% to
100%. The light will adjust to the set dimming level.
Note: Macros can turn on light dimming circuits, but lights cannot be dimmed through the macro.
The dimming level must be changed for each light dimming circuit.
emaNnoitpircseD
snottuBsthgiLlaicepS otsnottubsthgiLlaicepSehtrofdna,neercssihtniyalpsidotsthgilroF
eromr
oF.golaidsthgiLlaicepSehtnithgilehtngissatsriftsumuoy,krow
.53egap,)5fo2petS(stiucriCputeSotrefer,noit
amrofni
:ffOllA laicepSehtnidengissaneebevahtahtsthgilllaffosehctiwS
.)53egapees(ytiliturotarugifnoCehtf
o2petsnigolaidsthgiL
:nOllA laicepSehtnidengissaneebevahtahtsthgilllaffosehctiwS
.golaidsthgiL
:teSroloC evahtahtsthgilskrowREBIFdna,LAS,MASllanosehctiwS
.golaidsthgiLlaicepSehtnidengissaneeb
:cnySroloC dna,LAS,MASllaroferutaefcnySroloCehtsetavitcA
.golaiDsthgiLlaicepSehtnidengissaneebevahtahtsthgilskrowrebiF
:miwSroloC dna,LAS,MASllaroferutaefmiwSroloCehtsetavitcA
.golaidsthgiLlaicepSehtnidengissaneebevahtahtsthgilskrowrebiF
:raBsutatSedoMroloC dnasutatsnoitavitcaehtsetacidnirabderehT
roloCro,cnySroloC,teSroloCehtgnitavitcA.emitnoitelpmoctnerruc
ehtrofetunimenootpuekatnacti,etaidemmitonsiserutaefmiwS
.etelpmocotssecorp
Lights Screen (Continued)