Filter
Top Products
51
TANDBERG CONTENT SERVER
USER GUIDE
Table of
Contents
What’s New in
this Version?
Trademark/
Licenses
Safety/
Environmental
Introduction Installation Quick Setup Operation
Administrator
Settings
Conference
Setup
View
Conferences
Appendices
D 13898.04
DECEMBER 2006
Specifying Network Output Information
Administrator Settings > Template Editor > Windows Media Writer
In the Windows Media Writer Informa-
tion Page, click on Network to produce
the Network Output Information.
The Network Output Information Settings
About Network Output Information
Network is used to add the network
sink or server pull functionality to the
Content Server. It can only be used for
Windows Media in situations where you
want the external server to request the
stream.
A network publishing point has to
be created on the external Windows
Media server to take advantage of this
functionality.
Enter the Content Server name and port
for Server Pull of the data.
Server name. Enter the IP address
of the Content Server or (local) will
be interpreted as IP that the Content
Server is using.
Accessing these Settings
Port. Select a port that is NOT being
used on the Content Server (see
Appendix 5 for a list of ports used by
the Content Server)
The streaming path will be mms:\\
<server name>\<publishing point>,
where:
server name is the external Windows
Media server name
publishing point is the publishing
point you have created on the
external Windows Media server.
•
•
You may change the title by
following instructions described
for File Output.