Filter
Top Products
65
TANDBERG CONTENT SERVER
USER GUIDE
Table of
Contents
What’s New in
this Version?
Trademark/
Licenses
Safety/
Environmental
Introduction Installation Quick Setup Operation
Administrator
Settings
Conference
Setup
View
Conferences
Appendices
D 13898.04
DECEMBER 2006
Remote Desktop into your
Content Server and choose
Manage Your Server from
the Start Menu.
Using Templates for Multicast Delivery
Adminstrator Settings > Template Editor
Multicast Setup for Windows Media Streaming Server
About Multicast Delivery
To start delivering your content as a multicast
stream with Content Server version 2, you
need to ensure that:
Your network is multicast-enabled
The Multicast Publishing point is correctly
set up on your Windows Media Streaming
Server (you only need to do this setup
once)
The recording template that you want
to use for multicast content delivery is
configured correctly.
•
•
•
PLEASE NOTE THAT MULTICAST SETUP
FOR WINDOWS MEDIA SERVER ONLY
NEEDS TO BE DONE ONCE, BEFORE
FIRST USING MULTICAST. ONCE ALL SETTINGS
ARE APPLIED, YOU CAN USE MULTICAST BY
SIMPLY EDITING YOUR RECORDING TEMPLATE.
Click on Manage this
streaming media server.
Right-click on the existing TCSmulticastTemplate
and Select Remove from the drop-down menu.
Expand the list next to the
name of your streaming
media server, then expand
the list of Publishing
Points.
Now right click on “Publishing Points” and
choose Add Publishing Point (Advanced).
Edit the Add Publishing Point pop-up as follows:
Type
TCSmulticastTemplate
here
Type Push:* here
and click OK.
Select the TCSmulticastTemplate Publishing Point you have just created
and click on the Properties tab.
Select Category Authorization and set WMS Publishing Points ACL
Authorization to Enabled.
Cont...