Filter
Top Products
TELEDYNE INSTRUMENTS
460L Instruction Manual Safety Messages
05228 Rev B i
DCN 5164 PRINTED DOCUMENTS ARE UNCONTROLLED
SAFETY MESSAGES
Your safety and the safety of others is very important. We have provided many important safety
messages in this manual. Please read these messages carefully.
A safety message alerts you to potential hazards that could hurt you or others. Each safety
message is associated with a safety alert symbol. These symbols may be found in the manual and
inside the monitor. The definition of these symbols is described below:
GENERAL SAFETY HAZARD: Refer to the instructions for details on the
specific hazard.
CAUTION: Hot Surface Warning
CAUTION: Electrical Shock Hazard
TECHNICIAN SYMBOL: All operations marked with this symbol are to
be performed by qualified maintenance personnel only.
CAUTION
The monitor should only be used for the purpose and in the manner described in this
manual. If you use the monitor in a manner other than that for which it was intended,
unpredictable behavior could ensue with possible hazardous consequences.
NOTE
Technical Assistance regarding the use and maintenance of the Model 460L Nema Ozone
Monitor or any other Teledyne Instruments product can be obtained by:
Contacting Teledyne Instruments’ Customer Service Department at 800-324-5190
or
Via the internet at http://www.teledyne-api.com/inquiries.asp