clear ip dns server 111
■ “set ip dns domain” on page 138
■ “set ip dns server” on page 138
clear ip dns server Removes a DNS server from a WX switch configuration.
Syntax — clear ip dns server ip-addr
■ ip-addr — IP address of a DNS server.
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — The following command removes DNS server 10.10.10.69
from a WX switch’s configuration:
WX4400# clear ip dns server 10.10.10.69
success: change accepted.
See Also
■ “clear ip dns domain” on page 110
■ “display ip dns” on page 120
■ “set ip dns” on page 137
■ “set ip dns domain” on page 138
■ “set ip dns server” on page 138
clear ip route Removes a route from the IP route table.
Syntax — clear ip route {default | ip-addr mask |
ip-addr/mask-length} gateway
■ default — Default route.
default is an alias for IP address 0.0.0.0/0.
■ ip-addr mask — IP address and subnet mask for the route
destination, in dotted decimal notation (for example, 10.10.10.10
255.255.255.0).
