display spantree portvlancost 325
display spantree
portvlancost
Shows the cost of a port on a path to the STP root bridge, for each of the
port’s VLANs.
Syntax —
display spantree portvlancost port-list
■ port-list — List of ports.
Defaults — None.
Access — All.
History — Introduced in MSS Version 3.0.
Examples — The following command shows the STP port cost of port 1:
WX4400# display spantree portvlancost 1
port 1 VLAN 1 have path cost 19
See Also
■ “clear spantree portcost” on page 316
■ “clear spantree portvlancost” on page 317
■ “display spantree” on page 320
■ “set spantree portcost” on page 336
■ “set spantree portvlancost” on page 338
display spantree
statistics
Displays STP statistics for one or more WX network ports.
Syntax —
display spantree statistics
[port-list [vlan vlan-id]]
■ port-list — List of ports. If you do not specify any ports, MSS
displays STP statistics for all ports.
■ vlan vlan-id — VLAN name or number. If you do not specify a VLAN,
MSS displays STP statistics for all VLANs.
Defaults — None.
Access — All.
History — Introduced in MSS Version 3.0.
