display service-profile 259
WEP Key 1 value State of static WEP key number 1. Radios can use this key to
encrypt traffic with static Wired-Equivalent Privacy (WEP):
■ none —T he key is not configured.
■ preset — The key is configured.
Note: The WEP parameters apply to traffic only on the
encrypted SSID.
WEP Key 2 value State of static WEP key number 2:
■ none — The key is not configured.
■ preset — The key is configured.
WEP Key 3 value State of static WEP key number 3:
■ none — The key is not configured.
■ preset — The key is configured.
WEP Key 4 value State of static WEP key number 4:
■ none — The key is not configured.
■ preset — The key is configured.
WEP Unicast Index Index of the static WEP key used to encrypt unicast traffic on
an encrypted SSID.
WEP Multicast Index Index of the static WEP key used to encrypt multicast traffic
on an encrypted SSID.
Shared Key Auth Indicates whether shared-key authentication is enabled.
WPA enabled Indicates that the Wi-Fi Protected Access (WPA) information
element (IE) is enabled. Additional fields display the settings
of other WPA parameters:
■ ciphers — Lists the WPA cipher suites advertised by
radios in the radio profile mapped to this service profile.
■ authentication — Lists the authentication methods
supported for WPA clients:
802.1X — dynamic authentication
PSK — preshared key authentication
■ TKIP countermeasures time — Indicates the amount of
time (in ms) MSS enforces countermeasures following a
second message integrity code (MIC) failure within a
60-second period.
Note: The WPA fields are displayed only when the WPA IE is
enabled.
Table 56 Output for display service-profile (continued)
Field Description
