set snmp trap receiver 153
■ “set ip snmp server” on page 142
■ “set snmp community” on page 149
■ “set snmp trap receiver” on page 153
set snmp trap
receiver
Adds an IP address to the SNMP trap receiver table.
Syntax — set snmp trap receiver ip-addr
■ ip-addr — IP address of the trap receiver, in dotted decimal notation.
Default — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — To set the IP address of the SNMP trap receiver to
192.168.0.1, type the following command:
WX4400# set snmp trap receiver 192.168.0.1
success: change accepted.
See Also
■ “clear snmp trap receiver” on page 114
■ “display snmp configuration” on page 127
■ “set ip snmp server” on page 142
■ “set snmp community” on page 149
■ “set snmp trap” on page 150
set summertime Offsets the real-time clock of a wireless LAN switch by +1 hour and
returns it to standard time for daylight savings time or a similar
summertime period that you set.
Syntax —
set summertime summer-name [start week weekday
month hour min end week weekday month hour min]
■ summer-name — Name of up to 32 alphanumeric characters that
describes the summertime offset. You can use a standard name or any
name you like.
