A SERVICE OF

logo

510 CHAPTER 21: BOOT PROMPT COMMANDS
autoboot Displays or changes the state of the autoboot option. The autoboot
option controls whether a WX switch automatically boots a system image
after initializing the hardware, following a system reset or power cycle.
Syntax
autoboot [ON | on | OFF | off]
ON — Enables the autoboot option.
on — Same effect as ON.
OFF — Disables the autoboot option.
off — Same effect as OFF.
Defaults — The autoboot option is enabled by default.
Access — Boot prompt.
History —Introduced in MSS Version 3.0.
Examples — The following command displays the current setting of the
autoboot option:
boot> autoboot
The autoboot flag is on.
See Also
boot on page 511
Boot Profile
Management, cont.
next on page 521
change on page 513
delete on page 515
Diagnostics diag on page 516
test on page 523
Table 97 Boot Prompt Commands by Usage (continued)
Type Command