set authentication dot1x 193
Examples — To set the console port so that it does not enforce
username-password authentication for administrators, type the following
command:
WX4400# set authentication console * none
success: change accepted.
See Also
■ “clear authentication console” on page 166
■ “display aaa” on page 180
■ “set authentication admin” on page 189
■ “set authentication dot1x” on page 193
■ “set authentication last-resort” on page 197
■ “set authentication mac” on page 199
■ “set authentication web” on page 201
set authentication
dot1x
Configures authentication and defines how and where it is performed for
specified wireless or wired authentication clients who use an IEEE 802.1X
authentication protocol to access the network through the WX switch.
Syntax —
set authentication dot1x {ssid ssid-name | wired}
user-glob [bonded] protocol method1 [method2] [method3]
[method4]
■ ssid ssid-name — SSID name to which this authentication rule
applies. To apply the rule to all SSIDs, type any.
■ wired — Applies this authentication rule specifically to users
connected to a wired authentication port.
■ user-glob — A single user or a set of users with 802.1X network
access.
Specify a username, use the double-asterisk wildcard character (**) to
specify all usernames, or use the single-asterisk wildcard character (*)
to specify a set of usernames up to or following the first delimiter
character — either an at sign (@) or a period (.). (For details, see “User
Globs” on page 24.)
■ bonded — Enables Bonded Auth™ (bonded authentication). When
this feature is enabled, MSS authenticates the user only if the machine
the user is on has already been authenticated.
