Filter
Top Products
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEXSETUPCD CHANGER
16
Adjusting audio settings and sound distribution settings
The TravelPilot allows you to adjust the bass and treble for each audio source.
Changes to the balance and fader sound distribution settings and loudness set-
tings (aurally compensated volume) affect all the audio sources.
To adjust the audio settings,
1 press the TUNE button A or CD.C button @ to switch to the audio
source (radio, CD or CD changer) for which you would like to adjust the
settings.
2 Press the AUD button ;.
✔ The audio settings menu opens.
3 Use the
/ buttons on the rocker switch 7 to move the selection
marker to the menu item whose settings you want to change.
4 Use the
/ buttons on the rocker switch 7 to make the adjustments.
✔ The slide control is highlighted.
If you wish to apply your adjusted values,
5 press the OK button 8.
✔ The border around the slide control disappears and the values are saved.
Note: If you do not press a button within 30 seconds, the display
will switch back automatically to the initial menu (timeout).
FM TONE
LOUDNESS
BALANCE
FADER
TREBLE
-+
-+
-+
BASS
FM TONE
LOUDNESS
BALANCE
FADER
TREBLE
-+
-+
-+
BASS
Audio menu for the FM radio audio source