Filter
Top Products
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEXSETUPCD CHANGER
96
Setting the day / night changeover, viewing angle and dis-
play brightness
You can deactivate the automatic changeover to night-time display and adjust
the display brightness for the night and day displays in the display setup. You
can also change the display viewing angle here.
Automatic changeover to night display
If you want to deactivate the automatic changeover to the night-time display
because, for instance, you always drive with your headlights on,
1 open the setup menu,
2 open the DISPLAY menu item.
3 select the DAY / NIGHT menu item and
4 press the OK button 8.
✔ The setting changes to OFF.
To reactivate the automatic changeover feature, repeat the steps. The default
setting is ON.
Adjusting the viewing angle
Under the ANGLE menu item, you can adjust the display to suit the angle at
which you view it. To adjust the angle,
1 highlight the ANGLE menu item.
2 Adjust the angle using the
/ buttons on the rocker switch and
3 press the OK button 8.
DISPLAY
NIGHT
BRIGHTNESS:
DAY
ANGLE
-+
-+
-+
DAY⁄NIGHT ON