Filter
Top Products
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEXSETUPCD CHANGER
70
Switching TIM on / off, changing the recording standby time
When the car radio is switched on, you can turn the TIM function on / off as
follows.
1 Press the T button 9.
✔ The traffic menu appears in the display.
2 Keep pressing the softkey associated with the TIM menu item until the
required option 2H (for 2 hours recording standby), 24H (for 24 hours
recording standby) or OFF appears.
Note: You can also switch TIM off by keeping the T button 9 pres-
sed for longer than two seconds whilst the traffic menu is being
displayed.
If TIM is switched on, the traffic information provided by a tuned traffic informa-
tion station will be recorded after the unit is switched off.
TIP: You can also set TIM recording standby mode when you switch the
unit off.
✔ When you switch the unit off, GOODBYE appears in the display together
with the options for setting TIM standby.
1 Keep pressing the T button 9 until the required 2H, 24H or OFF option is
highlighted.
Listening to stored traffic messages
The unit can record 14 traffic messages.
To listen to the stored traffic messages,
1 press the T button 9.
2 Press the softkey assigned to the TIM-INFO menu item.
TRAFFIC
TIM
24H
V-INFO
TIM-INFO