Filter
Top Products
61
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEXSETUPCD CHANGER
ENGLISH
DEUTSCH
DEUTSCH
DEUTSCH
1 Switch to the setup menu by pressing the MENU button : and
2 keep pressing the softkey assigned to TA until the required ON or OFF
option appears. The default setting is ON.
TIP: You can also switch the TA function on/off using the macro button.
For further information on how to programme the macro button, read the
section entitled “Programming the macro button” in the “Setup” chapter.
Interrupting a traffic announcement
You can cancel the announcement by pressing the MENU : and ESC < but-
tons or by tuning into another station. If you assign the TA function to the macro
button 4, you can also interrupt a traffic announcement by pressing this but-
ton.
TMC (Traffic Message Channel)
TMC stands for Traffic Message Channel and refers to broadcast digital traffic
information that can be analysed by the TravelPilot for dynamic navigation. The
TMC function is currently not supported by all radio stations, so sometimes it
may not be possible to receive a TMC station in certain regions. When dynamic
navigation is active, the TravelPilot tunes into a TMC station automatically. For
further details, read the section entitled “Dynamic navigation” in the “Navigation”
chapter. If a TMC station is being received, a TMC symbol appears in the status
line. Six TMC stations can be stored in the FMC memory.
Note: Before TMC can be used, a navigation CD for the country which
you are currently in must have been inserted in the unit at least
once.
TIP: You can conveniently store the six TMC stations with the strongest
reception in the region using the TMC Store function. For further informa-
tion, read the section entitled “Storing TMC stations automatically” in this
chapter.