Filter
Top Products
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEXSETUPCD CHANGER
86
Configuring SCAN for a CD or all the CDs in the magazine
The SCAN function provides you with the option of choosing whether only the
tracks on the CD you are currently listening to should be scanned.
1 Switch to the setup menu by pressing the MENU button :.
2 Press the softkey assigned to the SCAN menu item until the required
option appears alongside SCAN.
CD - Only tracks on the CD currently being listened to will be scan-
ned.
MAG - All tracks on all the CDs in the magazine will be scanned.
Repeating tracks or CDs (REPEAT)
To repeat a track or a CD, activate the repeat function.
Activating the repeat function
Proceed as follows:
1 Select the required track or CD.
2 Switch to the functions menu by pressing the CD.C button @ and
3 press the softkey assigned to REPEAT.
✔ The track or CD is repeated until the repeat function is cancelled.
RPT appears in the status area of the main CD menu.
Cancelling the repeat function
If you want to cancel the repeat function,
1 press the ESC button <.
Activating the repeat function for tracks
If you only want to repeat the current track, you have to set the RPT function to
TRK before activating it.
TIME
ON OFF
TA
CD
RPTSCAN
MAG
MIX
CD
SCAN
CD
PROGRAM
NAME
MIX
REPEAT
TIME
ON ON
TA
TRK
RPTSCAN
MAG
MIX
CD