Filter
Top Products
65
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEXSETUPCD CHANGER
ENGLISH
DEUTSCH
DEUTSCH
DEUTSCH
Stopping TMC Scan
If you want to stop scan seek tuning or continue listening to a station set by the
scan seek tuning operation,
1 press the ESC button <.
✔ Scan seek tuning is stopped and the station that was tuned into last will
then continue to be heard.
Storing stations
The TravelPilot can store 24 FM stations on four memory levels and six MW
stations on one memory level.
Storing stations manually
To store a station manually,
1 switch to the radio functions menu by pressing the TUNE button A and
2 select the softkey assigned to the required FM memory level (FM1, FM2,
FMT or FMC) or the MW frequency range.
✔ The unit switches back to the main radio mode menu.
3 Tune into a station as described in the section entitled “Tuning into a
station” and
4 press and hold the softkey assigned to the required memory location
until after the confirmation beep is heard.
✔ The station is now stored to that memory location. The name and fre-
quency appear alongside the softkey in the display.