Filter
Top Products
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEXSETUPCD CHANGER
58
1 Switch to radio mode.
2 Press the MENU button :.
✔ The radio mode’s setup menu appears.
You will find the RDS item in the lower left display line. You can choose between
the VAR, FIX and OFF options. The default setting is VAR.
3 Keep pressing the softkey associated with RDS until the required option
appears alongside RDS.
FIX: RDS radio mode is activated. Since some stations not only use RDS
to broadcast their names but also advertising, you have the option of
keeping the station name permanently in the display. Changing display
contents, e.g. advertising, will not be displayed.
VAR: Default setting; RDS radio mode is fully activated. Changing dis-
play contents, e.g. advertising, will also be displayed.
OFF: RDS radio mode is deactivated. Stations can be tuned into using
the frequency details in the display. The “alternative frequency” function
is also deactivated.
Activating / deactivating RDS-REG
A further advantage provided by RDS is the “alternative frequency” function.
The unit constantly tunes into the frequency offering the best reception for a
particular station. However, some stations divide their content at certain times
into regional programmes that are tailored to a certain region. The “alternative
frequency” feature may therefore sometimes interrupt reception of a regional
programme because it has automatically switched frequency. If you are liste-
ning to a regional programme and want to prevent the unit from switching to
another frequency, select the ON setting for the REG item in the radio mode
menu. The unit will then only retune if it appears that a “loss of reception” is
about to occur, i.e. if the station can no longer be received on the tuned frequen-
cy.
JUMP
REG
ON
PTY
ON
RDS
VAR
OFF
R-TXT
OFF
SHARX
OFF
TA