Filter
Top Products
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEXSETUPCD CHANGER
78
Entering a name
1 Use the
/ and / buttons on the rocker switch 7 to move the
selection marker to the first letter of the name you wish to enter.
✔ The currently highlighted letter is displayed in an enlarged fashion within
the magnifier on the right of the display.
2 Press the OK button 8.
✔ The letter is entered into the name line at the top.
3 Continue in this manner with the remaining letters of the name.
Once you have finished entering the name,
4 keep the OK button 8 pressed for longer than two seconds or
4 highlight the
symbol and press the OK button 8.
✔ The name is stored and the unit switches to the CD functions menu. The
name is displayed in the functions area of the main CD menu.
Deleting characters
If you want to delete a letter that you have just entered,
1 press the ESC button <
or
1 highlight the
symbol and press the OK button 8.
Deleting the current name
To delete the name of the current CD,
1 switch to the CD name menu,
2 press the softkey assigned to CLR NAME.
✔ The name is deleted. The name will also be deleted if you open the spel-
ler again and close it by pressing the
symbol or by pressing the OK
button 8 for a longer period of time.
CD NAME
ÄÖÜ 1234567890
STONES
_
S
ABCDEFGHIJKLMNO
PQRSTUVWXYZ
-/.
EDIT
CLR NAME
CLR ALL