Filter
Top Products
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEXSETUPCD CHANGER
38
You can now move the destination to the required position in the tour memory:
1 Press the OK button 8.
✔ A reposition marker appears in front of the destination.
2 Use the
/ buttons on the rocker switch 7 to move the destination to
the required position in the tour list.
3 Press the OK button 8.
Using a destination from the destination memory as a new tour
destination
1 To assign a tour destination from the destination memory, select the NEW
DEST. item in the TOUR LIST menu.
2 Press the OK button 8.
✔ The DEST. ENTRY menu appears.
3 Select DEST. MEMORY.
✔ The DEST. MEMORY menu appears.
4 Select the destination memory from which you would like to use a desti-
nation.
✔ The contents of the selected destination memory are displayed.
5 Select the destination that you want to use in the tour list.
6 Press the OK button 8.
✔ The tour list is displayed. You can now move the destination to the re-
quired position.
Using the navigation system’s last destination
To use the navigation system’s last (current) destination,
1 select the STORE DEST. item in the TOUR LIST menu.
2 Press the OK button 8.
✔ The destination is entered in the tour list. The tour list is displayed.
TOUR LIST
STORE DEST.
NEW DEST.
START TOUR
CANCEL DEST.
SORT DEST.
TOUR LIST
STORE DEST.
NEW DEST.
START TOUR
CANCEL DEST.
SORT DEST.
TOUR LIST
STORE DEST.
NEW DEST.
START TOUR
CANCEL DEST.
SORT DEST.