Filter
Top Products
13
Before you start
Part Names and Functions
■ The control panel
Name Panel Description
Contrast/
Remaining
Film
Indicator
Contrast
Key
This lamp indicator notifies the user when the time to replace the thermal
transfer film is approaching (estimated) and of the printing contrast used
during copying.
Indicator off : Normal printing contrast.
Indicator on : Darker than normal printing contrast.
Indicator flashing : Almost time to replace the thermal transfer film.
(Note that only about 15 more sheets may be copied when
this indicator starts flashing.)
Replacement film (KX-BP081 or KX-BP082) is separately
available from the dealer where you purchased your unit.
The flashing indicator will go out after the power is turned off and the printer
has been opened and closed. (When copying is performed, this indicator will
begin flashing again.)
Each time this key is pressed, the unit will alternate between normal and
dark contrast modes (Normal/Dark).
2-Screen
Copy Key
This key causes the front and back of the screen to be copied on a single
sheet of paper.
Copy Key
This key prints a copy of the screen.
Advance
Key
This key advances the screen from right to left.
Multi-
Copy/
Error
Indicator
This indicator displays the number of copies to be made. The display
changes each time the multi-copy/stop key is pressed.
Example : 1→ 2 →
…
→ 9 → 1 →
…
When an error occurs, a flashing symbol will appear in this display to indicate the error
status. (See page 69.)
Multi-
Copy/
Stop Key
When making multiple copies, press this key until the desired number of
copies is displayed on the multi-copy/error indicator. This key can also be
pressed while multiple copies are being made to stop the copying
process. The display indication changes while multiple copies are being
made as shown below. After reaching 0, the display will reset to 1.
Example: 5 → 4 → 3 → 2 → 1 → 0 → 1 (countdown display during copying)
1 2