Filter
Top Products
84
Wall-mounting Kit (KX-B063)
BAttaching to plasterboard walls
Split-wing toggles (sold in stores) are needed.
Wall-mounting
fixture
Bolt
Plasterboard
split-wing toggle
Arms
Arms
Insert each bolt through a
hole in the wall-mounting
fixture and into the hole in
the wall beneath so that the
arms of the split-wing
toggle are horizontal.
For the correct hole size,
refer to the instructions for
the particular split-wing
toggles used.
Tighten each bolt until the
wall-mounting fixture is
securely fixed to the wall.
For the correct hole size,
refer to the instructions for
the particular wood screws
used.
After the arms expand, pull
the wall-mounting fixture
out until the arms of the
split-wing toggle grip firmly
into the wall.
BAttaching to wooden walls
Use wood screws (sold in stores).
Wall-mounting fixture
Wood screw
Wooden wall