Filter
Top Products
16
Loading Copy Paper
It is possible to load up to 80 sheets of Letter size copy paper [assuming a paper weight of 80g/m
2
(21 lbs)].
Note that only Letter paper may be used.
When the unit is first used or when " " flashes on the multi-copy/error indicator to indicate that the unit is out of
paper, load copy paper as described below.
Notes on Loading Copy Paper
Follow the guidelines below to ensure smooth and accurate printing by the unit.
COnly use Letter size copying paper having a weight of 60 to 90g/m
2
(16 to 24 lbs) as the copy paper for
this unit.
CDo not simultaneously load paper of varying type and thickness as this may result in paper jams.
CBefore adding copy paper, be sure to remove all copy paper remaining inside the unit's paper cover.
(Note : That copy paper will slightly resist being removed, but may be pulled out without problems.)
After removing the copy paper, stack the removed paper together with the new paper, fan it thoroughly,
square it and reload.
DO NOT USE THE FOLLOWING TYPES OF PAPER
CExtremely smooth or glossy paper
CCoated paper
CThermal paper
CPaper that is printed on one side
CWrinkled paper, creased paper, etc.
ON
OFF
1
Set the power switch to on ( | ).
C" " will flash on the multi-copy/error indicator
when copy paper has run out.
CBe absolutely sure to check that the power is
on when loading copy paper as it will not load
properly otherwise.
Note
Power Switch