Filter
Top Products
ON
OFF
14
Installing Thermal Transfer Film
Load the thermal transfer film into the film cassette and install in the printer.
Printer Open
Lever
Printer Door
Blue Gear
Blue Gear
Gear Tabs
Grooves
(Blue)
Green Gear
Tabs
Grooves
Green Gear
Green Gears
Thermal
Transfer Film
1
Set the power switch to on ( | ).
C" " will flash on the multi-copy/error indicator
when the thermal transfer film has run out.
2
Push down the printer open lever and open the
printer door.
3
Insert the four gears into the new thermal
transfer film.
CSecurely align the gear tabs with the grooves in
the thermal transfer film and insert them as far
as they will go.
CThere is a blue gear and three green gears
which need to be attached as shown in the
figure on the right.
Note
Power Switch