Filter
Top Products
26
Before Using the Interactive Function
■ Connecting to the PC
■ System requirements
Interactive Board
Interactive Cable
To the PC
(communication port)
Tray
Interactive
Connector
1
Connect one end of the proprietary interactive
cable supplied to the interactive connector
under the tray and the other end to the
computer's communication (COM) port.
CBe sure to turn off the electronic print board
and PC before you connect or take off the
interactive cable.
2
After connecting the interactive cable, securely
tighten the screws on the connector.
Computer: IBM
®
PC/AT or compatible machine with CD-ROM drive
CPU: Pentium
®
150MHz or higher processor
Port: 9-pin communication (COM) port
Operating System: Windows
®
95, Windows
®
98, Windows
®
Millennium Edition,
Windows NT
®
4.0 or Windows
®
2000
Memory: 32MB or higher
Hard Disk Space: At least 10MB free space
Note
This cable is a proprietary interactive cable for
connecting the electronic print board with
a PC.
Please do not use it with any other products.
Note