Filter
Top Products
p During playback of a scene shot from
multiple angles, the angle icon
is
displayed. Turn the angle icon display
on or off using “DVD-V Setup” menu.
= For details, refer to Setting angle icon dis-
play on page 147
b Change audio language and audio sys-
tems (Multi-audio)
Each time you touch [Audio], the DVD
switches between audio language and audio
system.
p Only digital output of DTS audio is pos-
sible. If navigation system’s optical digi-
tal outputs are not connected, DTS
audio can not be output, so select an
audio setting other than DTS.
p Display indications such as Dolby D and
5.1ch indicate the audio system re-
corded on the DVD. Depending on the
setting, playback may not be with the
same audio system as that indicated.
c Specify the chapter you want to play back
or the time to start playback by entering a
number
= For details, refer to Searching for a desired
scene, starting playback from a specified time
on this page
d Perform the operation (such as resuming)
stored in the disc
When using a DVD that has a point recorded
that indicates where to return to, the DVD re-
turns to the specified point and begins play
back from that point.
e Switch to the previous page of touch
panel keys
f Select the DVD menu item
g Decide the item
When you select a certain video item, play-
back starts from the selected item. When you
select an item with a submenu, the next menu
screen will appear.
p The way to display the menu differs de-
pending on the disc. For details, refer to
the instructions provided with disc.
Searching for a desired scene,
starting playback from a
specified time
You can search for a desired scene by specify-
ing a title or a chapter, and the time.
p Chapter search and time search are not
possible when disc playback has been
stopped.
1 Touch [10Key Search] and then touch
[Title] (title), [Chapter] (chapter), [Time]
(time).
2 Touch the keys to input the desired
number.
For titles, chapters
! To select 3, touch [3].
! To select 10, touch [1] and [0] in order.
! To select 23, touch [2] and [3] in order.
For time (time search)
! To select 21 minutes 03 seconds, touch [2],
[1], [Min], and [3], [Sec] in order.
! To select 71 minutes 00 seconds, touch [7],
[1], [Min] in order.
p To cancel the input numbers, touch [Clear].
3 While the input number is displayed,
touch [Enter].
This starts playback from the selected scene.
p With discs featuring a menu, you can also
touch [Menu]or[Top Menu] and then
make selections from the displayed menu.
Entering the numerical commands
You can use this function when you need to
enter a numerical command during DVD play-
back.
1 Touch [10Key Search] and then touch
[10key Mode] (10key mode).
Using the AV Source (Built-in DVD Drive and Radio)
En
106
Chapter
12