Filter
Top Products
Touch panel keys
1
2
3
4
1 Select a desired frequency from the list
Touch to recall the preset frequency.
p To register the frequency currently being
received to the preset list, touch and
hold the preset list.
Touch and hold: Store broadcast sta-
tions
You can register the frequency currently
being received to the preset list. You can ea-
sily store up to six broadcast frequencies
for later recall with the touch of a key.
p Touch to recall the preset frequency.
p Up to 6 stations can be stored in mem-
ory.
2 Touch: Perform manual tuning
To perform manual tuning, touch
or briefly. The frequencies move up
or down one step.
Touch and hold: Perform seek tuning
To perform seek tuning, keep touching
or for about one second
and release. The tuner will scan the fre-
quencies until a broadcast strong enough
for good reception is found.
p You can cancel seek tuning by touching
either
or briefly.
p If you keep touching
or
, you can skip broadcasting fre-
quencies. Seek tuning starts as soon as
you release the keys.
p You can also perform these operations
by using TRK (c/d) button.
3 Tune in strong signals
= For details, refer to Tuning in strong sig-
nals on the previous page
4 Store the strongest broadcast frequen-
cies
= For details, refer to Storing the strongest
broadcast frequencies on this page
Storing the strongest broadcast
frequencies
“BSM” (best stations memory) lets you auto-
matically store the six strongest broadcast fre-
quencies under preset tuning keys P1 — P6
and once stored there you can tune in to those
frequencies with the touch of a key.
% Touch and hold [BSM].
“BSM” starts. The six strongest broadcast fre-
quencies will be stored under preset tuning
keys P1 — P6 in order of their signal strength.
p To cancel the storage process, touch [Can-
cel].
p Storing broadcast frequencies with BSM
may replace broadcast frequencies you
have saved using P1 — P6.
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
1 Touch [Local].
2 Touch [On] to turn local seek tuning on.
p To turn local seek tuning off, touch [Off].
3 Touch c or d to set the sensitivity.
There are two levels of sensitivity for AM.
Level: 1 — 2
The level “2” setting allows reception of only
the strongest stations, while lower settings let
you receive weaker stations.
Using the AV Source (Built-in DVD Drive and Radio)
En
109
Chapter
12
Using the AV Source (Built-in DVD Drive and Radio)