Filter
Top Products
Changing the wide screen mode
CAUTION
For safety reasons, these functions are not avail-
able while your vehicle is in motion. To enable
these functions, you must stop in a safe place
and put on the parking brake before setting your
route (Refer to To ensure safe driving on page 22).
% Touch [Wide Mode] in System Settings
menu.
The Wide Mode screen appears.
On the Wide Mode screen, you can select the
following items:
Full, Just, Cinema, Zoom,orNormal
Normal (normal)
A 4:3 picture is displayed normally, giving you
no sense of disparity since its proportions are
the same as that of the normal picture.
Full (full)
A 4:3 picture is enlarged in the horizontal di-
rection only, enabling you to enjoy a 4:3 TV pic-
ture (normal picture) without any omissions.
Just (just)
The picture is enlarged slightly at the center
and the amount of enlargement increases hor-
izontally toward the ends of the picture, en-
abling you to enjoy a 4:3 picture without
sensing any disparity even on a wide screen.
Cinema (cinema)
A picture is enlarged by the same proportion
as Full or Zoom in the horizontal direction
and by an intermediate proportion between
Full and Zoom in the vertical direction; ideal
for a cinema-sized picture (wide screen pic-
ture) where captions lie outside the frame.
Zoom (zoom)
A 4:3 picture is enlarged in the same propor-
tion both vertically and horizontally; ideal for a
cinema-sized picture (wide screen picture).
p Different settings can be memorized for
each video source.
p When video is viewed in a wide screen
mode that does not match its original as-
pect ratio, it may appear differently.
p Remember that use of this system for com-
mercial or public viewing purposes may
constitute an infringement on the author’s
rights protected by the Copyright Law.
p Video may appear grainy when viewed in
Cinema or Zoom mode.
p The navigation map and the rear view cam-
era picture is always Full.
Setting for rear view camera
The following two functions are available. The
rear view camera feature requires a separately
sold rear view camera (e.g. ND-BC2). (For de-
tails, consult your dealer.)
Camera for backing up
The navigation system features a function that
automatically switches to the full-screen rear
camera image installed on your vehicle. When
the shift lever is in the REVERSE (R) position,
the screen automatically switches to full-
screen rear view camera.
Camera for Rear view mode
[Rear View] can be displayed at all times (e.g.
when monitoring an attached trailer, etc.) as a
split screen where map information is partially
displayed. Please be aware that in this setting,
camera image is not resized to fit, and that a
portion of what is seen by the camera is not
viewable.
CAUTION
Pioneer recommends the use of a camera which
outputs mirror reversed images, otherwise screen
image may appear reversed.
p Immediately confirm whether the display
changes to a rear view camera image when
the shift lever is moved to REVERSE (R)
from another position.
p When the screen changes to full-screen
rear view camera image during normal
driving, switch to the opposite setting in
[Polarity].
p Initially, this function is set to [Off].
1 Touch [Camera Input] in
System Settings menu.
Customizing the Audio Setting related with Audio Visual
En
149
Chapter
17
Customizing the Audio Setting related with Audio Visual