Filter
Top Products
= For details, refer to Storing the strongest
broadcast frequencies on the next page
5 Select a FM band
Touch [Band] repeatedly until the desired
FM band is displayed, FM 1, FM 2 or FM 3.
p This function is convenient to prepare
different preset lists for each band.
Storing the strongest
broadcast frequencies
“BSM” (best stations memory) lets you auto-
matically store the six strongest broadcast fre-
quencies under preset tuning keys [P1] — [P6]
and once stored there you can tune in to those
frequencies with a touch of the key.
% Touch and hold [BSM].
“BSM” starts. The six strongest broadcast fre-
quencies will be stored under preset tuning
keys [P1] — [P6] in order of their signal
strength.
p To cancel the storage process, touch [Can-
cel].
p Storing broadcast frequencies with “BSM”
may replace broadcast frequencies you
have saved using [P1] — [P6].
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
1 Touch [Local].
2 Touch [On] to turn local seek tuning on.
p To turn local seek tuning off, touch [Off].
3 Touch [c]or[d] to set the sensitivity.
There are four levels of sensitivity for FM.
Level: 1 — 2 — 3 — 4
The level “4” setting allows reception of only
the strongest stations, while lower settings let
you receive weaker stations.
Operating the Radio (AM)
You can listen to the radio by using the naviga-
tion system. This section describes operations
for Radio (AM).
Selecting [AM] as the source
% Touch the source icon and touch [AM].
= For details, refer to Selecting a source on
page 97
Screen configuration
1235
4
1 Source icon
Shows which source has been selected.
2 Preset number indicator
Shows what preset has been selected.
3 Frequency indicator
Shows to which frequency the tuner is tuned.
4 Preset list display
Shows the preset list.
5 LOCAL indicator
Shows when local seek tuning is on.
Touch panel key operation
% Touch the source icon and then touch
[AM] to select the radio (AM).
When the source icon is not displayed, you
can display it by touching the screen.
Using the AV Source (Built-in DVD Drive and Radio)
En
108
Chapter
12