Filter
Top Products
Selecting the video for rear
display
You can choose either to show the same
image as the front screen or to show the se-
lected source on the rear display.
1 Display the AVoperation screen.
= For detailsof theoperations, refer to Dis-
playing the AVoperation screen on page 74.
2Tap on the left edge of the screen.
p The appearance of this key changes accord-
ing to the current setting.
p While the tuner is receiving an emergency
announcement, traffic announcement, or
news program, the current setting cannot
be changed.
Each touch of changes the settings as fol-
lows:
! Mirror AV: The video on the frontscreen of
the navigation unit is output to the rear dis-
play
! DISC: The video and sound of the DVDsare
output to the rear display
! iPod: The video and sound of the iPod are
output to the rear display
! AV1: Thevideo and soundof AV1 are out-
put to the rear display
! AV2: Thevideo and soundof AV2 are out-
put to the rear display
p When “Mirror AV” is selected, the following
restrictions are applied to rear display.
— When selecting “Rear View” in the map
display, nothingis displayed.
— All sounds cannot be output for rear dis-
play.
— When playing back video files on the ex-
ternal storage device (USB, SD), the
video image is not output.
p When “DISC” is selected, the following re-
striction is applied to rear display.
— When a CD or MP3/WMA/AAC disc is
set in the built-in DVD drive, only the
sound is output.
p When “iPod” is selected, the following re-
striction is applied to rear display.
— The video image and sound are output
only when the corresponding setting on
“AV1 Input” is “iPod”.
p When “AV1” or “AV2” is selected, the fol-
lowing restrictions are applied to rear dis-
play.
— The video image and sound are output
only when “AV1” or “AV2” has both
video and sound.
— The video image and sound are output
only when the corresponding setting on
“AV1 Input” or “AV2 Input” are
“Video”.
Adjusting the picture
CAUTION
For safety reasons, you cannot use some of these
navigation functions while your vehicleis in mo-
tion. To enable thesefunctions, you must stop in
a safe place and apply the parking brake. Refer to
Important Information for the User (a separate
manual).
You can adjust the picture for each source and
rear view camera.
1 Press and hold the MODE button.
The “Picture Adjustment” screen appears.
2 Touch [+] or [–] to adjust the desired
item.
! Brightness: Adjusts the black intensity.
! Contrast: Adjusts the contrast.
! Color: Adjusts the color saturation.
! Color Temp.: Adjusts the tone of color
(which color is emphasized, red or blue).
! Dimmer: Adjusts the brightness of display.
p Touching [Camera] switches to the picture
adjustment screen for the rear view cam-
era.
En
176
Chapter
31
Customizing preferences