Pioneer AVIC-Z140BH Car Stereo System User Manual


 
p Touching [Source] while adjusting the rear
view camera image returns you to the pre-
vious screen.
p The adjustments of Brightnessand
Contrastare stored separately when your
vehicles headlights are off (daytime) and
when your vehicles headlights are on
(nighttime). These are switched automati-
cally depending on whether the vehicles
headlights are on or off.
p The adjustments of Dimmeris stored se-
parately when your vehicles headlights are
off (daytime) and when your vehicles head-
lights are on (nighttime). Dimmeris
switched automatically only when the value
of nighttime is lower than the value of day-
time.
p You cannot adjust Colorfor the source
without a video and navigation map display.
p The setting contents can be memorized se-
parately for the following screen and the
video image.
! Audio source
AM/FM/Tuner or HD Radio/CD/
ROM/iPod (Music)/SD (audio)/USB
(audio)/Bluetooth audio/XM/
SIRIUS/Pandora/aha/EXT1 (audio),
EXT2 (audio)/source off screen/
menu screens/others
! Video source
AV1 and iPod (Video)
DVD-V and DivX
SD (Video) and USB (Video)
AV2 (Video) and EXT1 (Video), EXT2
(Video)
Rear view camera image
! Map screen
p The picture adjustment may not be avail-
able with some rear view cameras.
p Because of the LCD screen characteristics,
you may not be able to adjustthe screen at
low temperatures.
3 Touch [+] or [] to adjust the desired
item.
Each touch of [+]or[] increases or decreases
the level of the desired item.
4 Touch
.
The previous screen returns.
Displaying the screen for
AV system settings
1 Press the HOME button to display the
Top Menu screen.
2 Touch [Settings].
The Settings Menuscreen appears.
3 Touch [AV Settings].
The AV System Settings menu appears.
4 Touch the item that you want to
change the setting.
# If you touch , the previous screen returns.
Setting video input 1 (AV1)
You can switch this setting according to the
connected component.
p This setting applies to mini-jack input.
En
177
Chapter
31
Customizing preferences
Customizing preferences