Filter
Top Products
1 2 3 4
1 Stores the strongest broadcast frequen-
cies
2 Switches the seek mode
3 Tunes in strong signals
4 Switches the reception mode
= For detailsof each function, refer to sec-
tions below with the relative titles.
Storing the strongest broadcast
frequencies
BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies under the preset tuning keys “Preset
1” to “Preset 6” and, once stored there, you
can tune in to these frequencies with the
touch of a key.
1 Touch
on the “Tuner” screen.
2 Touch [BSM].
3 Touch [Start] to begin a search.
“BSM” begins to flash. While “BSM” is flash-
ing, the six strongest broadcast frequencies
will be stored under the preset tuning keys
“Preset 1” to “Preset 6” in order of their signal
strength. When this is complete, “BSM” stops
flashing.
p To cancel the storage process, touch
[Stop].
p Storing broadcast frequencies with BSM
may replace broadcast frequencies you
have already saved.
Switching the seek mode
You can select the method of seek tuning.
1 Touch
on the “Tuner” screen.
2 Touch [Seek] to select the desired set-
ting.
! All:
Seeks stations from both analog and digital
broadcasting.
! HD:
Seeks from digital broadcasting only.
p If you select “HD” onthis setting while
[Blending] is set to “Analog”, the setting
on [Blending] turns to “D/A Auto” automa-
tically.
Tuning in strong signals
Local seek tuning allows you to tune in only
those radio stations with sufficiently strong
signals for good reception.
1 Touch
on the “Tuner” screen.
2 Touch [Local].
3 Touch [On] to turn local seek tuning on.
To turn local seek tuning off, touch [Off].
4 Touch [cPrev] or [Nextd] to set the sen-
sitivity.
There are four levels of sensitivity for FM and
two levels for AM:
FM: 1 — 2 — 3 — 4
AM: 1 — 2
p The FM “4” (AM “2”) setting allowsrecep-
tion of only the strongest stations, while
lower settings let you receive weaker sta-
tions.
Switching the reception mode
If a digital broadcast reception condition gets
poor, the tuner automatically switches to the
analog broadcast of the same frequency level
by default. If you want to prevent a frequent
automatic switching, switch this setting to
[Analog].
1 Touch
on the “Tuner” screen.
En
89
Chapter
16
HD Radio
™
reception
HD Radio
™
reception