Filter
Top Products
1
The DM-3106 is a slim, lightweight and portable LCD picture monitor which comes in handy for the monitoring and
non-linear editing of the pictures shot during live broadcasts, on location or in studios, etc.
It comes with many different functions including ones for adjusting the brightness, contrast and chroma and
displaying various markers. Its input signal support 23 HDTV video formats and two SDTV video formats.
Outline of DM-3106
6.3-inch a-Si TFT LCD panel featured
(View angle: 120° to the left and right, 105° up and down (45° up, 60° down) ; XGA
1024 × 768)
Input of HD-SDI, SD-SDI, composite and component signals supported
25 different video formats supported
Standards complied with by HD-SDI signals: SMPTE292M, BTA S-004B (1.485 Gbps SDI input)
Standards complied with by SD-SDI signals: SMPTE259M (270 Mbps SDI input)
Standards complied with by component signals: BTA S-001B, SMPTE 274M, SMPTE 296M
Standards complied with by composite signals: SMPTE 170M, ITU-R624-4
SDI IN, COMPOSITE, SDI MONITOR OUT and COMPONENT connectors provided
Functions for adjusting brightness, contrast, chroma, filter, monochrome and
gamma
Marker display functions
(FRAME, CENTER, 95%, 93%, 88%, 80%, 4:3, 13:9, 14:9, 2.35:1, 1.85:1, 1.66:1,
Grating, BOX, USER)
Setting of aspect ratio by user enabled
(H_FULL, V_FULL, Actual Size (HD only), 16:9 (SD only), Blanking, Under Scan)
Setting of front switches by user enabled
(Aspect ratio selection, monochrome, blue-only and display/non-display of
markers, chroma boosting function, etc.)
Setting of remote controller by user enabled
(Input signal selection, marker ON/OFF selection, mask ON/OFF selection, etc.)
Automatic tracking of input signals possible
Automatic 1/1.000 and 1/1.001 frame rate tracking and input signal detection
functions
Conversion of LCD frequency by frame conversion function enabled
Selection of 5500K, 6500K or 9300K color temperature possible (even more
subtle color tone and gray scale adjustments possible)
Functions for detecting audio errors and CRC/EDH errors for input channels
provided
Time code (VITC) display
1
1
CONCERNING THE DM-3106