Filter
Top Products
Chapter 4 MAIN SPECIFICATIONS
69
4.9 Settings when initialization is performed
The settings established when the DM-3106 was shipped from the factory and when they have been
initialized are listed below.
4.9.1 Common setting items
The settings for the following items are the same whether for the SDI A, SDI B, VBS or COMPONENT
signals. These settings are “Factory Default” settings, and they are not initialized unless the settings of
all the channels are initialized.
Setting item Setting/adjustment range Initial value
Current CH SDI A/ SDI B/ VBS/ COMPONENT SDI A
Color Temperature 9300K/6500K/5500K 6500K
G-Brightness -50.0 to +50.0% 0.0%
B-Brightness -50.0 to +50.0% 0.0%
R-Brightness -50.0 to +50.0% 0.0%
G-Contrast 0.0 to 200.0% 100.0%
B-Contrast 0.0 to 200.0% 100.0%
R-Contrast 0.0 to 200.0% 100.0%
G-Gamma 1.00 to 4.00 2.20
B-Gamma 1.00 to 4.00 2.20
R-Gamma 1.00 to 4.00 2.20
Select Marker
Frame, Center, 95%, 93%, 88%, 80%, 4:3,
13:9, 14:9, 2.35:1, 1.85:1, 1.66:1, Grating, User,
Box
Frame, Center
Box H position 0 to 1023pix 166pix
Box V position 0 to 767pix 125pix
Box Width 1 to 1024pix 692pix
Box Height 1 to 768pix 518pix
User Marker H 0 to 100% 85%
User Marker V 0 to 100% 85%
Marker Thickness
×1/×2/×3/×4 ×1
Audio Level Meter CH 1-8Ch/9-16Ch 1-8Ch
Tally Type Upper/Frame Upper
Color Bar ON/OFF OFF
Aspect TYPE A/TYPE B TYPE A
Aspect A-HD 4:3/16:9/Actual Size/Blanking/Under Scan 16:9
Aspect A-SD 4:3/16:9/Twice Size/Blanking/Under Scan 4:3
Aspect B-HD 4:3/16:9/Actual Size/Blanking/Under Scan 4:3
Aspect B-SD 4:3/16:9/Twice Size/Blanking/Under Scan 16:9
Marker ON/OFF OFF
Mask ON/OFF OFF
Half Mask ON/OFF OFF
Time Code ON/OFF ON
Audio Level Meter ON/OFF ON