Filter
Top Products
Chapter 3 OPERATION
41
3.4.30 Switching the audio level meter display ON/OFF
1. Press the MENU switch.
2. Turn the adjustment dial to select DISPLAY SETTING
or AUDIO LEVEL METER , and press the ENT switch.
3. Turn the adjustment dial to select Audio , and press the ENT switch to
select ON or OFF.
3.4.31 Switching the time code display ON/OFF
1. Press the MENU switch.
2. Turn the adjustment dial to select DISPLAY SETTING , and press the ENT
switch.
3. Turn the adjustment dial to select Time Code , and press the ENT switch to
select ON or OFF.
3.4.32 Switching the input signal ID display ON/OFF
1. Press the MENU switch.
2. Turn the adjustment dial to select DISPLAY SETTING , and press the ENT
switch.
3. Turn the adjustment dial to select CH ID , and press the ENT switch to
select ON or OFF.
A
udio data complying with the BTA S-006B and SMPTE272M-A standards is
displayed. For details on the audio level meter, refer to “4.7 Concerning the
audio level meter.”
NOTE
When composite signals or component signals have been selected, no
sound is output so the audio level meter will not show the levels of the audio
signals.
CAUTION
The VITC complying with the ARIB STD-B4 version 2.0 standard is
displayed as the time code. The time code display does not function when
composite signals or component signals have been selected.
NOTE