Filter
Top Products
Chapter 3 OPERATION
19
3.3.8 Display information selection screen
The operations which can be performed using the items on this screen are described below.
Item Description
Audio
This is where the audio level meter display is set to ON or OFF. (*1)
(Refer to “3.4.30 Switching the audio level meter display ON/OFF.”)
Time Code
This is where the time code display is set to ON or OFF.
(Refer to “3.4.31 Switching the time code display ON/OFF.”)
CH ID
This is where the input channel ID (character) display is set to ON or OFF.
(Refer to “3.4.32 Switching the input signal ID display ON/OFF.”)
Format
This is where the input signal format display is set to ON or OFF. (Refer to “3.4.33
Switching the format display ON/OFF.”) When it is ON, the format is displayed for
only 3 seconds after the format has been changed.
Err Status
This is where the subtitle data, audio error count, CRC/EDH error count, Time and
Last display are set to ON or OFF.
(Refer to “3.4.34 Switching the error status display ON/OFF.”)
Info Color
This is where the display color of the displayed information except for the markers
and time code is changed. (Refer to “3.4.63 Changing the color of the characters.”)
Mark Color
This is where the display color of the markers is changed.
(Refer to “3.4.61 Changing the color of the markers.”)
TC Color
This is where the display color of the time code is changed.
(Refer to “3.4.62 Changing the color of the time code.”)
*1: This is the same function as Audio on the 3.3.12 Audio level meter
display setting screen. Whether it was set on the display information
selection screen or on the audio level meter display setting screen, the
same setting will be used for Audio .
NOTE