Filter
Top Products
Chapter 2 PARTS AND THEIR FUNCTIONS
5
(16) AUDIO switch
Used to adjust the volume level of the output sound or set the output channel.
Each time the switch is pressed, its setting changes in the following sequence: volume
→ left channel → right channel. When it is held down, the audio output is muted. (*4)
(Refer to “3.4.59 Adjusting the output volume level” and “3.4.60 Setting the output audio
channel.”)
(17) Adjustment dial Used to adjust or select the settings.
(18) Headphone jack The sound carried on the input signals are output in stereo from this jack.
*1: Do not turn the power back on for at least 3 seconds after having turned it off. The power to the monitor may not be supplied properly
if it is turned back on too soon.
*2: Do not turn off the power while the setting saving process is in progress. If the power is turned off during this process, all the user
data saved in the monitor will be destroyed, and the initial settings will be established when the power is next turned on.
*3: When the REMOTE switch is set to ON, the remote control reception status is established. If the remote control is left unconnected
when LEVEL control has been set for remote control, the remote control status will be judged to be open, and the settings selected so
far may be changed. To prevent this, set the remote control allocations to NON, select Edge for the remote control status or take
some other action.
*4: The output audio muting status is released either by holding down the AUDIO switch or by re-adjusting the volume level.