Filter
Top Products
Chapter 3 OPERATION
29
3.4.4 Setting the aspect ratio
1. Press the MENU switch.
2. Turn the adjustment dial to select SCREEN ASPECT , and press the ENT
switch.
3. Turn the adjustment dial to select the aspect ratio to be changed, and press
the ENT switch.
4. Turn the adjustment dial to select the aspect ratio which has been changed,
and press the ENT switch.
3.4.5 Selecting the monochrome display or color display
1. Press the MENU switch.
2. Turn the adjustment dial to select OTHERS , and press the ENT switch.
3. Turn the adjustment dial to select Mono , and press the ENT switch to
switch the display from monochrome or color or vice versa.
3.4.6 Selecting the blue only or color display
1. Press the MENU switch.
2. Turn the adjustment dial to select OTHERS , and press the ENT switch.
3. Turn the adjustment dial to select Blue Only , and press the ENT switch to
switch the display from blue only to color or vice versa.
SW R.C.
SW R.C.
When HD signals are input respectively for type A or type B, select the
display method applying when SD signals are input. For details on the
aspect ratios which can be selected, refer to “4.6 Concerning the aspect
ratios.”
NOTE
When ON is switched to OFF or vice versa for G, B and R in the monochrome
or blue only status, the monochrome or blue only status will be set to OFF.
CAUTION
When ON is switched to OFF or vice versa for G, B and R in the
monochrome or blue only status, the monochrome or blue only status will be
set to OFF.
CAUTION