Filter
Top Products
48
3.4.46 Executing the NTSC setup
1. Press the MENU switch.
2. Turn the adjustment dial to select OTHERS , and press the ENT switch.
3. Turn the adjustment dial to select NTSC Setup , and press the ENT switch to
select the setting.
3.4.47 Saving and calling the settings
1. Press the MENU switch.
2. Turn the adjustment dial to select LOAD & SAVE , and press the ENT
switch.
3. Turn the adjustment dial to select Save if the settings are to be saved or
Load if the saved settings are to be loaded, and press the ENT switch.
4. Turn the adjustment dial to select the number of the setting to be saved or
loaded, and press the ENT switch to enter it.
Select OFF when NTSC signals with a setup of 0 are input; select 7.5IRE
when signals with setup are input.
NOTE
Do not turn off the power while Wait is displayed. If the power is turned
off while the settings are being saved, all the user data saved in the monitor
will be destroyed, and the initial settings will be established when the power is
next turned on.
CAUTION