Filter
Top Products
28
3.4.2 Selecting the format
1. Press the MENU switch.
2. Turn the adjustment dial to select SELECT FORMAT , and press the ENT
switch.
3. Turn the adjustment dial to select the format, and press the ENT switch to
enter the format.
3.4.3 Selecting the aspect ratio
1. Press the MENU switch.
2. Turn the adjustment dial to select OTHERS , and press the ENT switch.
3. Turn the adjustment dial to select Aspect , press the ENT switch, and select
type A or type B.
SW R.C.
When AUTO is selected as the format setting, the input signals are identified
and automatically tracked. If any other setting is selected, processing is
based on the timing system of the format designated. However, when
composite signals are displayed, only the AUTO, 525i/60 or 625i/50 format
can be selected, and when component signals are displayed, any format
except 525i/60 and 625i/50 can be selected.
<Format types>
A
UTO, 1080i/60(30sF), 1080p/30, 1080sF/25(50i), 1080p/25, 1080sF/24,
1080p/24, 1035i/60, 720p/60, 720p/50, 720p/30, 720p/25, 720p/24, 525i/60,
625i/50
NOTE
Refer to the next section for the method used to set the aspect ratio (type
A
/type B) to be selected.
NOTE